Step Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box. Plug the other end into the “In A” port on the A/B switch. Step Using a fifth coaxial wire (wire #5), plug one end into the “Out to TV (RF)” port on your Converter Box. Plug the other end into the “Antenna In (RF)” port on your Converter Box. Step Using a fourth coaxial wire (wire #4), plug one end into the other “Out” port on the 2-way splitter. Plug the other end into the “Antenna In (RF)” port on your TV set. Step Using a third coaxial wire (wire #3), plug one end into the “Out” port on the A/B switch. Plug the other end into the “In B” port on the A/B switch. Step Using a second coaxial wire (wire #2), plug one end into one of the “Out” ports on the 2-way splitter. Before you begin you should unplug your TV. If you do not already have them, you will also need to purchase three additional coaxial wires (for a total of five), a 2-way splitter and an A/B switch. Your new Converter box will come with a second coaxial wire and a remote control. Supplies: You will need your analog TV, the antenna you have been using (indoor or outdoor), and the coaxial wire that currently connects your antenna to your TV (as pictured on the right). Set-up #2: Your TV has only an “Antenna In” port: To watch analog broadcasts, set your TV to "TV In." You will be able to access all available analog broadcasts through your TV's remote control. To watch digital broadcasts, set your TV to "Video In.” Using the remote control that came with your Converter Box, follow the on-screen set-up guide to scan for available DTV channels, and begin enjoying the benefits of Digital Television! You will be able to access all available digital broadcasts through your converter box and its remote control. If your TV does not have a red port, leave that cable unplugged on both ends. Plug the other end of the cables into the “A/V In” port on your TV set in the same way. Match the colors of the plugs to the colors of the ports, so that red plugs into red, white into white, and yellow into yellow. Step Using a set of A/V cables, plug one end of the cables into the “A/V Out” ports on the Converter Box. Step Using a third coaxial wire (wire #3), plug one end into the other “Out” port on the 2-way splitter. Step Plug wire #1 into the “In” port on your 2-way splitter. Step Unplug the coaxial antenna wire (wire #1) from your TV “Antenna In (RF)” port.
If you do not already have them, you will also need to purchase a third coaxial wire and a 2-way splitter. Your new Converter box will come with a second coaxial wire, a set of A/V cables (three wires with red, white and yellow plugs), and a remote control.
Supplies: You will need your analog TV, the antenna you have been using (indoor or outdoor), and the coaxial wire that currently connects your antenna to your TV (as pictured on the far right). Set-up #1: Your TV has “Audio/Video In” (A/V In) ports: Option 2: Purchase any Converter Box and use either of the following set-ups.
#DIGITAL TO ANALOG TV CONVERTER RADIO SHACK INSTALL#
Option 1: Purchase a Converter Box that has “analog pass-through” capability and install it using our “Basic Set-Up” Guide. If you wish to watch over-the-air programming with an antenna (such as “rabbit ears” on your TV or an antenna on your roof) from stations that broadcast in digital (such as full-power stations) and stations that broadcast in analog (such as low-power, Class A or TV translator stations), you should choose one of the following options: Analog TVs can receive digital television (DTV) signals by using a “Digital-to-Analog Converter Box” that can be purchased at retail stores.
0 kommentar(er)
